ANSWER 15
L-13
-------------------------------------------------------------------------
FRAME 16
The last items in the VFR Supplement to be discussed are the length
and width of the runways.
These are found by looking at the airport
sketch.
To determine the length of Runways 9 and 27 at Elkhart Muni, look
along the runway, either above or below it, until you find the length and
width. The dimensions are 5,500 feet long by 75 feet wide. Runways 17
and 35 are 3,999 feet long by 75 feet wide. When the airport sketch is
not shown, only the length will be given beneath the airport elevation.
*************************************************************************
ANSWER 38
No response required.
-------------------------------------------------------------------------
FRAME 39
Item 22 is the clearance status. This section is of use to pilots
on international flight plans.
A separate DOD FLIP, titled Foreign
Clearance Guide, covers the details of this section.
Because of its
limited use, it will not be discussed in this subcourse. The items found
under the headings include the following abbreviations: AOE-airport of
entry, FCB-foreign clearance base, and LRA-landing rights airport.
36
AV0961
Previous Page
