LESSON
IDENTIFICATION AND CONTROL OF INSTRUMENT
FLIGHT RULE (IFR) AIRCRAFT
Tasks: 011-143-1037
011-143-1038
011-143-1044
OVERVIEW
TASK DESCRIPTION
In this lesson you will learn to control aircraft in a radar environment.
LEARNING OBJECTIVE
TASKS:
You will effectively control IFR arrival and departure aircraft, provide radar
approach information, and identify-aircraft using radar procedures.
CONDITION:
You are manning the arrival (feeder) control position at an air traffic control
(ATC) radar ground controlled approach (GCA) facility.
STANDARD:
You will properly identify aircraft and vector to final approach according to
standards set forth in the Federal Aviation Administration (FAA) Handbook
7110.65E.
REFERENCES:
The material in this lesson was derived from the following publications:
FAA Handbook 7110.65E.
STP 1-93C1-SM.
INTRODUCTION
The ability to properly identify aircraft in a radar environment is very important. This procedure must
be mastered in order to perform the arrival or feeder controller duties necessary to ensure safe and
orderly traffic flow within.
1
AV0905
Previous Page
