LESSON 2
HYDRAULIC PLUMBING
STP TASKS: 551-758-1007, 551-758-1008,
551-758-1012, and 551-758-1071
OVERVIEW
LESSON DESCRIPTION:
In this lesson you will learn the identification, fabrication,
installation, and storage requirements for tubes and hoses. You will
also learn the types of seals and gaskets.
TERMINAL LEARNING OBJECTIVE:
ACTION:
After this lesson you will demonstrate a knowledge of
the
identification,
fabrication,
installation
and
storage requirements for tubes and hoses, along with
the types of seals and gaskets.
CONDITIONS:
You will study the material in
this
lesson
in
a
classroom environment or at home.
STANDARD:
You will correctly answer all the questions in the
practice
exercise
before
you
proceed
to
the
examination.
REFERENCES:
The material contained in this lesson was derived from
the following publications:
AR 310-25 (Dictionary of United States Army Terms).
AR
310-50
(Authorized
Abbreviations
and
Brevity
Codes).
FM 1-563 (Fundamentals of Airframe Maintenance).
FM 1-509 (Fundamentals of Aircraft Pneudraulics).
TM 1-1500-204-23 Series (General Aircraft Maintenance
Manual).
25
AL0907
Previous Page
